英國外科醫生用3D打印修復患者面容

3D printing to rebuild patient's face at Morriston Hospital

中國日報網 2013-11-19 11:46

Surgeons in Swansea are using 3D printing technology to rebuild a patient's face which was crushed in a motorbike accident.

It works by using images from a CT scan to design implants that are created in titanium by a 3D printer.

The groundbreaking work is being led by Morriston Hospital consultant maxillofacial surgeon Adrian Sugar.

It is being featured in an exhibition at the Science Museum in London before the operation itself is carried out.

There have been cases using custom-made titanium implants to correct congenital conditions, those which arise at birth or shortly after.

However, this is thought to be one of the first such reconstructions following an injury.

Abertawe Bro Morgannwg University Health Board's maxillofacial laboratory services manager and reconstructive scientist Peter Evans said: "The patient suffered trauma and had multiple injuries across his body, including some quite severe facial injuries.

"He underwent emergency surgery at the time and we are now at the stage where we can do a proper reconstruction of his face."

The project is the work of the Centre of Applied Reconstructive Technologies in Surgery (Cartis).

The centre was established in 2006 as a partnership between Morriston Hospital's maxillofacial unit and Product Design and Research (PDR) based at Cardiff Metropolitan University.

Cartis aims to make Wales a world leader in the research, development and application of advanced medical technologies in surgery.

Mr Sugar and Mr Evans worked with PDR's Sean Peel and Ffion O'Malley to plan the complex surgery, which will involve repositioning the patient's facial bones.

They worked from a CT scan that allowed them to create a mirror image of the unaffected side of the patient's face.

From this they designed guides to cut and position the bones with pinpoint accuracy, as well as implants tailor-made for the patient.

The guides and implants are being produced from medical-grade titanium in Belgium.

Mr Evans added: "We have done everything up the point of surgery. The concept of the operation has been virtually designed and we hope to do the work very soon.

"The patient's facial symmetry will be restored so he should be back to normal as far as his facial looks are concerned."

查看譯文

英國斯旺西的外科醫生正在用3D打印技術來修復一個病人的臉部，該患者的臉在一次摩托車事故中受創。

他們利用CT掃描的影像來設計移植物，該移植物是通過3D打印機用鈦合金打印的。

此項開創性的工作是由莫里斯頓醫院頜面外科醫生艾德里安·休格領導的。

在進行手術之前，它在倫敦科學博物館的一個展覽會上亮相了。

已經有案例將定制的鈦合金移植物應用于矯正出生時或出生后不久形成的先天性不足。

但是，此次手術被認為受傷后修復手術的先例。

Abertawe Bro Morgannwg大學健康委員會頜面實驗服務經理、修復專家彼得?埃文斯說：“患者遭受創傷，全身多處受傷，面部也嚴重受傷?！?/p>

“當時我們給他做了急診手術，現在我們正在盡力給他做一個面部修復手術”。

該項目是外科應用重建技術中心（Cartis）的杰作。

該中心成立于2006年，是莫里斯頓頜面部門和位于卡迪夫城市大學的產品設計和研究所（FDR）合作設立的。

Cartis旨在使威爾士在外科手術中先進醫療技術的研究，開發和應用處于世界領先地位。

休格和埃文斯與PDR的兩位工作人員一起合作策劃了此項復雜的手術，其中包括重排患者的面骨。

CT掃描讓他們創建了病人臉部未受傷的那部分的鏡像。

之后他們就可以設計指南，在高精確度下切割和重排面骨，并為患者植入為其量身定做的人造面。

該指南和人造面正在用比利時用醫用鈦合金生產。

埃文斯補充說：“我們已經做好了手術的所有準備，希望能快點進行手術。

“我們需要修復患者面貌的對稱性，這樣他就可以恢復正常了?！?/p>

（譯者 757876277 編輯丹妮）

上一篇 : 專家警告：配方奶鋁含量過高
下一篇 : 《深化改革決定》要點雙語對照（二）

中國日報網英語點津版權說明：凡注明來源為“中國日報網英語點津：XXX（署名）”的原創作品，除與中國日報網簽署英語點津內容授權協議的網站外，其他任何網站或單位未經允許不得非法盜鏈、轉載和使用，違者必究。如需使用，請與010-84883561聯系；凡本網注明“來源：XXX（非英語點津）”的作品，均轉載自其它媒體，目的在于傳播更多信息，其他媒體如需轉載，請與稿件來源方聯系，如產生任何問題與本網無關；本網所發布的歌曲、電影片段，版權歸原作者所有，僅供學習與研究，如果侵權，請提供版權證明，以便盡快刪除。